WR-SG
The second generation Waverider SG (WR-SG) is a real-time non-directional wave height measuring buoy. Wave height is measured with a resolution of 1 cm using the well-proven Datawell stabilized platform sensor.
Manufacturer: Datawell |
Die zweite Generation der Waverider SG (WR-SG) ist eine ungerichtete Echtzeit-Wellenhöhenmessboje. Die Wellenhöhe wird mit einer Auflösung von 1 cm unter Verwendung des bewährten Datawell-Sensors mit stabilisierter Plattform gemessen. Die stabilisierte Plattform stellt sicher, dass die Boje die vertikale Komponente der orbitalen Wellenbewegung genau verfolgt. Bei der WR-SG wurde die Plattformbefestigung des Sensors verstärkt, was die Robustheit der Boje deutlich erhöht.
Measurment
- wave height for wave periods of 1.0 to 30 seconds, accuracy 0.5 % of measured value
- water temperature
Sensor
- wave motion sensor based on a stabilised platform, accelerometer, and magnetic compass.
Additional features
- GPS for buoy monitoring and tracking through HF link
- internal data logger
- LED flash antenna
- power switch
- 0.9 m (0.7 m) diameter spherical hull of AISI 316
- Battery lifetime 2.6 years (1.3 years)
- optional Cunifer hull, warranted not to corrode
- Radar reflectors: Two reflectors mounted on hatchcover (retrofittable)
- Compact Air temperature (CAT4) antenna
Options for communication
- HF-Link: Frequency range 25.5 to 35.5 MHz (35.5 to 45.0 MHz on request).
Transmission range 50 km over sea, user replaceable.
For use with the Datawell RX-C or RX-D receiver.
- Iridium SBD Satellite communication
- Iridium Internet Module
- GSM Mobile communication
Batteries
- WR-SG bouy with 0.7 m diameter needs 13 RC25G batteries.
- WR-SG bouy with 0.9 m diameter needs 26 RC25G batteries.
Software
- Data acquisition and evaluating via using the Waves5 software.